RaspberryPISetup

From DrewWiki
Revision as of 19:17, 31 August 2015 by Drew (talk | contribs) (Created page with "<pre> Setup wireless: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md Setup touch screen: https://learn.adafruit.com/adafruit-5-800x480-tft-h...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Setup wireless:
https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

Setup touch screen:
https://learn.adafruit.com/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack?view=all

To-do
	??? Backlight control, disable backlight after not used for awhile???
	!!! Calibrate touch screen !!!
		https://learn.adafruit.com/ar1100-resistive-touch-screen-controller-guide?view=all

Start X as different user:
# raspi-config #select option for Gui
# vi /etc/lightdm/lightdm.conf
autologin-user=drew

Disable Mouse Cursor for touchscreen:
# sudo apt-get install unclutter
# unclutter -idle 0
	!!! launch this at boot

Start Programs Full Screen
sudo apt-get install maximus
	!!! launch this at boot
	!!! maybe use devilspie

Start screen with xterm
# echo "startup_message off" >> ~/.screenrc
# export DISPLAY=":0.0"
# x-terminal-emulator --display :0.0 -e screen &
# screen -x 

Virtual Keyboard:
http://ozzmaker.com/2014/06/30/virtual-keyboard-for-the-raspberry-pi/?utm_source=feedly

pyobd
# sudo apt-get install screen
# sudo apt-get install python-serial
# sudo apt-get install bluetooth bluez-utils blueman
# sudo apt-get install python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev
# sudo apt-get install git-core
wget from http://www.obdtester.com/pyobd-install