NUTUPSMonitor

1. Install network ups tool;

# yum install nut nut-client

2. Change mode from none -> standalone in /etc/ups/nut.conf

#MODE = none
MODE = standalone

3. Add a UPS device in /etc/ups/ups.conf;

[drewups]
        driver=usbhid-ups
        port = auto
        desc = "Office UPS"

• • Use auto for port if USB

4. Create a master to use to communicate with nut in /etc/ups/upsd.users;

[amasteruser]
       password = anawesomepassword
       upsmon master

5. Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;

MONITOR drewups@localhost 1 amasteruser anawesomepassword master

NOTIFYCMD /home/drew/cron/upspager.sh

NOTIFYFLAG ONLINE       SYSLOG+EXEC+WALL
NOTIFYFLAG ONBATT       SYSLOG+EXEC+WALL
NOTIFYFLAG LOWBATT      SYSLOG+EXEC+WALL
NOTIFYFLAG FSD          SYSLOG+EXEC+WALL
NOTIFYFLAG COMMOK       SYSLOG+EXEC+WALL
NOTIFYFLAG COMMBAD      SYSLOG+EXEC+WALL
NOTIFYFLAG SHUTDOWN     SYSLOG+EXEC+WALL
NOTIFYFLAG REPLBATT     SYSLOG+EXEC+WALL
NOTIFYFLAG NOCOMM       SYSLOG+EXEC+WALL
NOTIFYFLAG NOPARENT     SYSLOG+EXEC+WALL

6. upspager.sh script;

#!/bin/bash
echo "$*" | mail -s "drewups alert" [email protected]

7. Start nut at boot and fire it up;

# chkconfig ups on
# /etc/init.d/ups start