NUTUPSMonitor - Revision history

Drew at 08:34, 25 January 2018

2018-01-25T08:34:49Z

← Older revision		Revision as of 02:34, 25 January 2018
Line 1:		Line 1:
	1. Install network ups tool;		1. Install network ups tool;
	<~~pre~~># yum install nut nut-client</~~pre~~>		<syntaxhighlight lang=bash>
			# yum install nut nut-client
			</syntaxhighlight>


	2. Change mode from none -> standalone in /etc/ups/nut.conf		2. Change mode from none -> standalone in /etc/ups/nut.conf
	<~~pre~~>		<syntaxhighlight lang=bash>
	#MODE = none		#MODE = none
	MODE = standalone		MODE = standalone
	</~~pre~~>		</syntaxhighlight>


	3. Add a UPS device in /etc/ups/ups.conf;		3. Add a UPS device in /etc/ups/ups.conf;
	* Use auto for port if USB		* Use auto for port if USB
	<~~pre~~>		<syntaxhighlight lang=bash>
	[drewups]		[drewups]
	driver=usbhid-ups		driver=usbhid-ups
	port = auto		port = auto
	desc = "Office UPS"		desc = "Office UPS"
	</~~pre~~>		</syntaxhighlight>


	4. Create a master to use to communicate with nut in /etc/ups/upsd.users;		4. Create a master to use to communicate with nut in /etc/ups/upsd.users;
	<~~pre~~>[amasteruser]		<syntaxhighlight lang=bash>
			[amasteruser]
	password = anawesomepassword		password = anawesomepassword
	upsmon master</~~pre~~>		upsmon master
			</syntaxhighlight>


	5. Create a user on the system to monitor;		5. Create a user on the system to monitor;
	<~~pre~~> # useradd -s /sbin/nologin -g nut nutmon</~~pre~~>		<syntaxhighlight lang=bash>
			# useradd -s /sbin/nologin -g nut nutmon
			</syntaxhighlight>

	Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;		Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;
	<~~pre~~>[root@drewserv ~]# grep -v ^$ /etc/ups/upsmon.conf \| grep -v ^#		<syntaxhighlight lang=bash>
			[root@drewserv ~]# grep -v ^$ /etc/ups/upsmon.conf \| grep -v ^#
	MINSUPPLIES 1		MINSUPPLIES 1
	SHUTDOWNCMD "/sbin/shutdown -h +0"		SHUTDOWNCMD "/sbin/shutdown -h +0"
Line 54:		Line 61:
	NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL		NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL
	NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL		NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL
	</~~pre~~>		</syntaxhighlight>


	6. upspager.sh script;		6. upspager.sh script;
	<~~pre~~>#!/bin/bash		<syntaxhighlight lang=bash>
	echo "$*" \| mail -s "drewups alert" me+alerts@gmail.com</~~pre~~>		#!/bin/bash
			echo "$*" \| mail -s "drewups alert" me+alerts@gmail.com
			</syntaxhighlight>

	7. Start nut at boot and fire it up;		7. Start nut at boot and fire it up;
	<~~pre~~># chkconfig ups on		<syntaxhighlight lang=bash>
	# /etc/init.d/ups start</~~pre~~>		# chkconfig ups on
			# /etc/init.d/ups start
			</syntaxhighlight>

Drew at 21:42, 30 July 2011

2011-07-30T21:42:54Z

← Older revision		Revision as of 15:42, 30 July 2011
Line 30:		Line 30:

	Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;		Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;
	<pre[root@drewserv ~]# grep -v ^$ /etc/ups/upsmon.conf \| grep -v ^#		<pre>[root@drewserv ~]# grep -v ^$ /etc/ups/upsmon.conf \| grep -v ^#
	MINSUPPLIES 1		MINSUPPLIES 1
	SHUTDOWNCMD "/sbin/shutdown -h +0"		SHUTDOWNCMD "/sbin/shutdown -h +0"

Drew at 21:42, 30 July 2011

2011-07-30T21:42:38Z

← Older revision		Revision as of 15:42, 30 July 2011
Line 30:		Line 30:

	Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;		Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;
	<pre>RUN_AS_USER nutmon		<pre[root@drewserv ~]# grep -v ^$ /etc/ups/upsmon.conf \| grep -v ^#
			MINSUPPLIES 1
	MONITOR drewups~~@localhost~~ 1 ~~amasteruser anawesomepassword~~ master		SHUTDOWNCMD "/sbin/shutdown -h +0"
			POLLFREQ 5
	NOTIFYCMD /mnt/raid5/backup/cron/upspager.sh		POLLFREQALERT 5
			HOSTSYNC 15
			DEADTIME 15
			POWERDOWNFLAG /etc/killpower
			RBWARNTIME 43200
			NOCOMMWARNTIME 300
			FINALDELAY 5
			RUN_AS_USER nutmon
			MONITOR drewups 1 drew mypassword master
			NOTIFYCMD /mnt/raid5/drew/backup/cron/upspager.sh
	NOTIFYFLAG ONLINE SYSLOG+EXEC+WALL		NOTIFYFLAG ONLINE SYSLOG+EXEC+WALL
	NOTIFYFLAG ONBATT SYSLOG+EXEC+WALL		NOTIFYFLAG ONBATT SYSLOG+EXEC+WALL
Line 45:		Line 53:
	NOTIFYFLAG REPLBATT SYSLOG+EXEC+WALL		NOTIFYFLAG REPLBATT SYSLOG+EXEC+WALL
	NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL		NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL
	NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL</pre>		NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL
			</pre>

Drew at 20:04, 15 September 2010

2010-09-15T20:04:53Z

← Older revision		Revision as of 14:04, 15 September 2010
Line 26:		Line 26:


	5. ~~Configure /etc/ups/upsmon.conf~~ to monitor ~~drewups as amasteruser, run a script when an action occurs, as well as alert~~;		5. Create a user on the system to monitor;
	<pre>~~MONITOR drewups@localhost 1 amasteruser anawesomepassword master~~		<pre> # useradd -s /sbin/nologin -g nut nutmon</pre>

	NOTIFYCMD /~~home~~/~~drew~~/cron/upspager.sh		Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;
			<pre>RUN_AS_USER nutmon

			MONITOR drewups@localhost 1 amasteruser anawesomepassword master

			NOTIFYCMD /mnt/raid5/backup/cron/upspager.sh

	NOTIFYFLAG ONLINE SYSLOG+EXEC+WALL		NOTIFYFLAG ONLINE SYSLOG+EXEC+WALL

Drew at 00:37, 29 April 2010

2010-04-29T00:37:13Z

← Older revision		Revision as of 18:37, 28 April 2010
Line 1:		Line 1:
	1. Install network ups tool;		1. Install network ups tool;
	<pre># yum install nut nut-client</pre>		<pre># yum install nut nut-client</pre>


	2. Change mode from none -> standalone in /etc/ups/nut.conf		2. Change mode from none -> standalone in /etc/ups/nut.conf
Line 7:		Line 8:
	MODE = standalone		MODE = standalone
	</pre>		</pre>


	3. Add a UPS device in /etc/ups/ups.conf;		3. Add a UPS device in /etc/ups/ups.conf;
			* Use auto for port if USB
	<pre>		<pre>
	[drewups]		[drewups]
Line 15:		Line 18:
	desc = "Office UPS"		desc = "Office UPS"
	</pre>		</pre>
	** Use auto for port if USB

	4. Create a master to use to communicate with nut in /etc/ups/upsd.users;		4. Create a master to use to communicate with nut in /etc/ups/upsd.users;
Line 21:		Line 24:
	password = anawesomepassword		password = anawesomepassword
	upsmon master</pre>		upsmon master</pre>


	5. Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;		5. Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;
Line 37:		Line 41:
	NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL		NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL
	NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL</pre>		NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL</pre>


	6. upspager.sh script;		6. upspager.sh script;

Drew: Created page with '1. Install network ups tool;

# yum install nut nut-client

2. Change mode from none -> standalone in /etc/ups/nut.conf

 #MODE = none MODE = standalone

3. …'

2010-04-29T00:35:15Z

Created page with '1. Install network ups tool; <pre># yum install nut nut-client</pre> 2. Change mode from none -> standalone in /etc/ups/nut.conf <pre> #MODE = none MODE = standalone </pre> 3. …'

New page

1. Install network ups tool;
<pre># yum install nut nut-client</pre>

2. Change mode from none -> standalone in /etc/ups/nut.conf
<pre>
#MODE = none
MODE = standalone
</pre>

3. Add a UPS device in /etc/ups/ups.conf;
<pre>
[drewups]
driver=usbhid-ups
port = auto
desc = "Office UPS"
</pre>
** Use auto for port if USB

4. Create a master to use to communicate with nut in /etc/ups/upsd.users;
<pre>[amasteruser]
password = anawesomepassword
upsmon master</pre>

5. Configure /etc/ups/upsmon.conf to monitor drewups as amasteruser, run a script when an action occurs, as well as alert;
<pre>MONITOR drewups@localhost 1 amasteruser anawesomepassword master

NOTIFYCMD /home/drew/cron/upspager.sh

NOTIFYFLAG ONLINE SYSLOG+EXEC+WALL
NOTIFYFLAG ONBATT SYSLOG+EXEC+WALL
NOTIFYFLAG LOWBATT SYSLOG+EXEC+WALL
NOTIFYFLAG FSD SYSLOG+EXEC+WALL
NOTIFYFLAG COMMOK SYSLOG+EXEC+WALL
NOTIFYFLAG COMMBAD SYSLOG+EXEC+WALL
NOTIFYFLAG SHUTDOWN SYSLOG+EXEC+WALL
NOTIFYFLAG REPLBATT SYSLOG+EXEC+WALL
NOTIFYFLAG NOCOMM SYSLOG+EXEC+WALL
NOTIFYFLAG NOPARENT SYSLOG+EXEC+WALL</pre>

6. upspager.sh script;
<pre>#!/bin/bash
echo "$*" | mail -s "drewups alert" me+alerts@gmail.com</pre>

7. Start nut at boot and fire it up;
<pre># chkconfig ups on
# /etc/init.d/ups start</pre>